
Pneumatic Workshop Tools
This pneumatic tool combination includes sheet metal shears for cutting metal and other sheet materials, a needle scaler for removing paint, rust and stubborn dirt, and an air maintenance unit for regulating pressure, preparing compressed air and lubrication.
The tools have working pressures up to 6.3 bar; the maintenance unit has an adjustable operating pressure of 0.5–8 bar. A pressure hose is not included.
Country prices Excludes delivery
| Country | Price | Store |
|---|---|---|
| France | €17.99 | Lidl ↗ |
| Slovakia | €22.99 | Lidl ↗ |
Product details
Pneumatic sheet metal shears PDNB 6.3 C3
- For precise cutting of metal and other sheet materials
- Particularly suitable for clean, straight and curved cuts with little waste
- Safety switch with start lock
- Robust aluminium body with powder coating
- Included accessory: 1 pre-installed ¼-inch plug connector with sealing ring
- Recommended compressor: tank capacity of at least 50 litres
- Pressure hose is not included
- Rated speed: max. 3,600/min.
- Max. working pressure: 6.3 bar
- Cutting width: 5.5 mm
- Max. cutting capacity: 1.2 mm in sheet metal, 1.6 mm in aluminium
Pneumatic needle scaler PDNE 4000 C3
- Ideal for removing paint, rust and stubborn dirt
- With 19 steel needles
- Integrated pressure regulator
- Robust aluminium body with powder coating
- Non-slip handle with soft surface
- Included accessories: 1 pre-installed ¼-inch plug connector with sealing ring, 1 hex key and 1 oil bottle
- Recommended compressor: tank capacity of at least 50 litres
- Pressure hose is not included
- Impact rate: max. 4,000/min.
- Working pressure: max. 6.3 bar
- Steel needle dimensions: each 3 x 180 mm (Ø x L)
Pneumatic air maintenance unit PDWE 8 C3
- 3 in 1: pressure regulation, compressed air preparation and lubrication
- Pressure regulator with continuously adjustable operating pressure and pressure gauge
- Water separator with replaceable filter and integrated drain valve
- Oil mist lubricator with adjustable oil feed and refill opening
- Metal bowl can be removed without tools and has a screw cap
- Wall-mounting facility; mounting materials included
- Included accessories: wall-mounting materials, ¼-inch plug connector and quick-release coupling
- Adjustable operating pressure: 0.5–8 bar
- Air preparation: replaceable filter and water separator
- Lubrication: adjustable oil mist lubricator
- Max. working pressure: 8 bar
- Connection thread: ¼ inch
Dimensions
- Pneumatic sheet metal shears: approx. 23 x 4.1 x 10.1 cm
- Pneumatic needle scaler: approx. 34.5 x 18.7 x 5 cm
- Pneumatic air maintenance unit: approx. 21.7 x 20.8 x 9.7 cm
Weight
- Pneumatic sheet metal shears: approx. 890 g
- Pneumatic needle scaler: approx. 2.06 kg
- Pneumatic air maintenance unit: approx. 772.5 g
Available alternatives
Price history
- Lowest recorded price
- €14.99
FAQ
What materials and thicknesses can the sheet-metal shears cut?
They can cut sheet metal up to 1.2 mm thick and aluminum up to 1.6 mm thick.
How many needles does the pneumatic rust remover have?
It has 19 steel needles, each measuring 3 x 180 mm (Ø x length).
What functions does the maintenance unit provide?
It combines pressure regulation, compressed-air preparation, and lubrication; it also has a replaceable filter and water separator.
What operating pressure can be set on the maintenance unit?
Its adjustable operating pressure is 0.5–8 bar.



