Electric city bike

This electric bike has a 355 Wh removable battery integrated into the seat post. It can be charged while fitted to the bike or removed for charging. The speed sensor works with a 250 W Ananda M131SD rear hub motor, rated at 40 Nm, with ECO, TOUR and RACE assistance modes and a Boost function for up to 20 seconds. Motor assistance is provided up to approximately 25 km/h.

• Open, low-step aluminium frame; 50 cm frame height
• 27.5-inch wheels; suitable for rider heights of 160–190 cm
• Shimano Tourney 7-speed drivetrain; 14–28 cassette range
• Mechanical TEKTRO MD-M280 disc brakes, 160 mm front and rear; no coaster brake
• Kenda Kwick Drumlin K1216 puncture-resistant tyres, 2 inches / 50 mm wide, with reflective strips and Schrader valves
• Suspension fork, adjustable stem, ergonomic CRIVIT comfort saddle with High Resilience Foam
• LED handlebar display shows battery level and assistance mode; walk assist included
• Integrated lighting powered by the battery: Sate-lite C6 front light (40 lux); rear light integrated into the seat post (6 candela). Front and rear reflectors included; no spoke reflectors
• AtranVelo rear rack with click system, maximum load approximately 25 kg; compatible baskets and panniers attach using the system
• Front and rear mudguards, bell and kickstand
• Protected compartment for a Smart Tracker, such as an Apple AirTag
• IPX5 protection against water jets
• Approximately 24 kg; maximum rider weight including payload: 96 kg; maximum permitted total weight: 120 kg
• 98% pre-assembled; align and tighten the handlebar, fit the pedals and adjust the saddle height

Battery and charging

• LG cells; 355 Wh, 36 V, 10 Ah
• Charging time: 5.5 hours; 2 A charger listed in the source

Care and use

• For charging, the recommended temperature is 10–25 °C; allow a cold battery to reach room temperature first.
• Recharge every 5–6 weeks during storage to help prevent deep discharge. Store the battery dry, away from direct sunlight, preferably at 40–60% capacity and where temperatures stay above 5 °C. Charge in a dry environment above 5 °C.
• Clean the bike regularly; clean the sprockets and clean and lubricate the chain. The recommended tyre pressure on dry asphalt is approximately 4–4.5 bar (60–68 PSI); check the tyre sidewall for exact pressures.
• Brake maintenance should be carried out by a service partner or professional bicycle workshop.