Pneumatic Sheet Metal Cutting and Surface Preparation Tools
This workshop set combines a pneumatic sheet metal shear, needle scaler and air maintenance unit for cutting sheet metal, removing coatings and preparing compressed air.
The shear cuts up to 1.2 mm sheet steel or 1.6 mm aluminium. The scaler uses 19 hardened steel needles, and the maintenance unit regulates and filters air with adjustable mist lubrication.
Country prices Excludes delivery
| Country | Price | Store |
|---|---|---|
| Slovakia | €12.99 | Lidl ↗ |
| Netherlands | €18.99 | Lidl ↗ |
Product details
Set components
- Sheet metal shear: For straight and curved cuts, with a 5.5 mm cutting width and a maximum cutting capacity of 1.2 mm in sheet steel and 1.6 mm in aluminium. It has a maximum nominal speed of 3600 min⁻¹, a safety switch with switch-on lock and a powder-coated aluminium housing.
- Needle scaler: Uses 19 hardened steel needles at up to 4000 min⁻¹ to mechanically remove paint, rust and stubborn dirt. An integrated pressure regulator adjusts working intensity; the soft-grip surface supports handling during extended use.
- Air maintenance unit: Combines pressure regulation, a water separator with replaceable filter and adjustable mist lubrication. Working pressure is continuously adjustable from 0.5 to 8 bar. It has a pressure gauge and a tool-free removable reservoir. Mounting hardware is included.
Materials and setup
The tool housings are made of powder-coated aluminium. The shear block and scaler needles are steel. The tools each come with a ¼" plug-in nipple; the air maintenance unit comes with mounting hardware and a quick coupling.
A compressor with a tank capacity of at least 50 litres is recommended.
Available alternatives
Price history
- Lowest recorded price
- €19.99
Specifications
| Product name | Pneumatic sheet metal shear PDNB 6.3 C3 / needle scaler PDNE 4000 C3 / air maintenance unit PDWE 8 C3 |
|---|---|
| Maximum working pressure (sheet metal shear) | 6.3 bar |
| Maximum working pressure (needle scaler) | 6.3 bar |
| Maximum working pressure (air maintenance unit) | 8 bar |
| Cutting width (sheet metal shear) | 5.5 mm |
| Maximum cutting capacity | 1.2 mm in sheet steel / 1.6 mm in aluminium |
| Nominal speed (sheet metal shear) | max. 3600 min⁻¹ |
| Stroke frequency (needle scaler) | max. 4000 min⁻¹ |
| Adjustable working pressure (air maintenance unit) | 0.5–8 bar |
| Connection thread | ¼″ |
| Material | Housing: powder-coated aluminium; shear block/needles: steel |
| Dimensions (sheet metal shear) | approx. 230 x 42 x 101 mm |
| Dimensions (needle scaler) | approx. 345 x 187 x 50 mm |
| Dimensions (air maintenance unit) | approx. 215 x 208 x 95 mm |
| Weight (sheet metal shear) | approx. 890 g |
| Weight (needle scaler) | approx. 2070 g (device without accessories) |
| Included accessories | Each tool with a ¼″ plug-in nipple; air maintenance unit with mounting hardware and quick coupling |
FAQ
What materials can the pneumatic sheet metal shears cut?
They are designed for metal and other sheet materials. Maximum cutting capacity is 1,2 mm for sheet metal and 1,6 mm for aluminum.
What accessories are included with the pneumatic sheet metal shears?
One ¼“ plug-in connector with sealing ring is included, pre-installed. The pressure hose is not included.
What comes with the pneumatic needle rust remover?
It includes one pre-installed ¼“ plug-in connector with sealing ring, one hex key and one oil can. The remover has 19 steel needles.
What does the pneumatic maintenance unit do?
It combines pressure regulation, compressed-air preparation and lubrication. Its adjustable operating pressure is 0,5 – 8 bar.