Replacement Chains for Pole Pruners
Replacement chains for pole pruners, intended to replace worn or damaged chains. The set contains two chains: one for a 6-inch bar and one for a 7-inch bar.
Both chains are made of steel and have a 1.1 mm groove width and 7.62 mm pitch. Check that these dimensions match your tool before fitting.
Get price alerts
Country prices Excludes delivery
| Country | Price | Store |
|---|---|---|
| Slovakia | €7.99 | Lidl ↗ |
| Poland | €8.44PLN 36.99 | Lidl ↗ |
| Belgium | €8.99 | Lidl ↗ |
| France | €8.99 | Lidl ↗ |
| Netherlands | €11.99 | Lidl ↗ |
| Spain | €12.99 | Lidl ↗ |
| Czech Republic | €13.58CZK 329.90 | Lidl ↗ |
| Germany | €14.99 | Lidl ↗ |
Product details
Fit and compatibility
The PEK 6 A1 chain is for 6-inch bars, including the PARKSIDE PGHSA 12 C3 and PGHSA 12 D4 models. It has 28 drive links. The PEK 7 A2 chain is for 7-inch bars, including the PARKSIDE PAGHS 20-Li-C3 and PAGHS 20-Li-C4 models. It has 31 drive links.
The set contains one chain of each variant. Both have a 7.62 mm pitch and a 1.1 mm groove width. Check that the chain dimensions match your tool before fitting.
Construction and use
The chains are made of steel and have half-chisel teeth. Heel-shaped drive links are described as helping the chain run smoothly on the bar and reducing vibration.
Care and handling
- Check chain tension regularly and sharpen the chain occasionally.
- If the chain is significantly worn or damaged, replace it.
- Store chains in a dry, protected place to help prevent corrosion.
- When changing the chain, follow the tool manufacturer's instructions.
Price history
- Lowest recorded price
- €7.99
Related products
Specifications
| Feature | Technical specification |
|---|---|
| Material | Steel |
| Groove width | 1.1 mm |
| Pitch | 7.62 mm (0.3") |
| Bar length, PEK 6 A1 | 15.24 cm (6 inches) |
| Drive links, PEK 6 A1 | 28 pieces |
| Bar length, PEK 7 A2 | 17.7 cm (7 inches) |
| Drive links, PEK 7 A2 | 31 pieces |
| Dimensions per chain | approx. 14 x 8.5 x 3.5 cm |
| Weight per chain | PEK 6 A1: approx. 45 g; PEK 7 A2: approx. 48 g |
| Compatibility, PEK 6 A1 | Suitable for PARKSIDE pole pruner models: PGHSA 12 C3; PGHSA 12 D4 |
| Compatibility, PEK 7 A2 | Suitable for PARKSIDE pole pruner models: PAGHS 20-Li-C3; PAGHS 20-Li-C4. |