Parkside Druckluft-Blechknabber / -Nadelentroster / -Wartungseinheit (Wartungseinheit)

Pneumatic sheet metal shears

• For precise cutting of metal and other sheet materials
• Suitable for clean straight and curved cuts with little waste
• Safety switch with start lock
• Robust aluminium body with powder coating
• Included accessories: 1 ¼“ plug-in connector with sealing ring (pre-assembled)
• Recommended compressor: tank volume of 50 litres or more
• Pressure hose not included
• Rated speed: max. 3 600/min.
• Max. working pressure: 6,3 bar
• Cutting width: 5,5 mm
• Max. cutting capacity: 1,2 mm in sheet metal, 1,6 mm in aluminium

Pneumatic needle scaler

• For removing paint, rust and stubborn dirt
• With 19 steel needles
• Integrated pressure regulator
• Robust aluminium body with powder coating
• Non-slip handle with soft surface
• Included accessories: 1 ¼“ plug-in connector with sealing ring (pre-assembled), 1 hex key, 1 oil can
• Recommended compressor: tank volume of 50 litres or more
• Pressure hose not included
• Impact rate: max. 4 000/min.
• Working pressure: max. 6,3 bar
• Steel needle dimensions: each 3 x 180 mm (Ø x L)

Pneumatic air maintenance unit

• 3 in 1: pressure regulation, compressed air preparation and lubrication
• Pressure reducer with continuously adjustable operating pressure and pressure gauge
• Water separator with replaceable filter and integrated drain valve
• Oil mist lubricator with adjustable oil feed and refill opening
• Metal cup removable without tools, with screw cap
• Wall-mounting device, including mounting materials
• Included accessories: wall-mounting materials, ¼“ plug-in connector, quick coupling
• Adjustable operating pressure: 0,5 – 8 bar
• Air preparation: replaceable filter + water separator
• Lubrication: adjustable oil mist lubricator
• Max. working pressure: 8 bar
• Connection thread: ¼“

Dimensions

• Pneumatic sheet metal shears: approx. 23 x 4,1 x 10,1 cm
• Pneumatic needle scaler: approx. 34,5 x 18,7 x 5 cm
• Pneumatic air maintenance unit: approx. 21,7 x 20,8 x 9,7 cm

Weight

• Pneumatic sheet metal shears: approx. 890 g
• Pneumatic needle scaler: approx. 2,06 kg
• Pneumatic air maintenance unit: approx. 772,5 g