Parkside Druckluft-Blechknabber »PDNB 6.3 C3«

Sheet Metal Nibbler PDNB 6.3 C3

Designed for straight and curved cuts in sheet steel and aluminium, with a 5.5 mm cutting width and a designed speed of up to 3600 min⁻¹. Maximum cutting capacity is 1.2 mm in steel and 1.6 mm in aluminium. The safety switch has a start lock. The housing is powder-coated aluminium.

Needle Scaler PDNE 4000 C3

For removing paint, rust and stubborn dirt. It has 19 steel needles, a maximum impact rate of 4000 min⁻¹, an integrated pressure regulator and an anti-slip soft grip.

Air Maintenance Unit PDWE 8 C3

Combines a pressure regulator, water separator and mist lubricator. The adjustable pressure range is 0.5–8 bar. It has a pressure gauge, a replaceable filter with drain valve and a removable reservoir that can be detached without tools. Wall mounting and mounting hardware are provided.

Use and included items

A compressor with a tank capacity of at least 50 litres is recommended for stable operation. The compressed-air hose and compressor are not included. A 1/4" plug nipple with sealing ring is pre-installed; accessories depend on the module and include a quick coupling and mounting hardware.

Check the working pressure before use, wear suitable protective clothing and guide the nibbler slowly and evenly to help prevent material distortion.