Angle Grinder Cutting and Grinding Discs

Disc types and uses

• Metal cutting discs: Five discs, each approximately 1.2 mm thick, for cutting thin-walled metal, including stainless steel.
• Metal grinding discs: Two discs, each approximately 4.0 mm thick, for deburring, grinding weld seams and removing rust or paint.
• Multi-purpose cutting disc: Approximately 1.0 mm thick; for cutting wood, plaster and wood-plastic composite materials, including wood with nails.
• Turbo diamond cutting disc: Approximately 1.0 mm thick; for dry or wet cutting of hard ceramic materials.
• Diamond cutting disc for wet cutting: Approximately 1.0 mm thick; for wet cutting hard porcelain stoneware and ceramic.

Compatibility and operating limits

For angle grinders with a disc diameter of approximately 76 mm and a bore of approximately 10 mm. Compatible with the PARKSIDE PWSA 12 C3 and many common cordless and mains-powered angle grinders. Maximum rotational speed: approximately 20,100 rpm. Maximum working speed: approximately 80 m/s.

Use and safety

Before each use, choose the appropriate disc and check it for cracks, chipping or visible deformation. Do not use a damaged disc. Observe the maximum speed limits. Wear safety glasses, hearing protection and suitable gloves when grinding or cutting. When wet-cutting with a diamond disc, provide an appropriate water supply.